Production of Alpha-Alumina from Black Aluminum Dross Using NaOH Leaching Followed by Calcination


TÜRK M., ALTINER M., TOP S., KARACA S., Bouchekrit C.

JOM, cilt.72, sa.10, ss.3358-3366, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 72 Sayı: 10
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1007/s11837-020-04281-7
  • Dergi Adı: JOM
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, ABI/INFORM, Aerospace Database, Applied Science & Technology Source, Communication Abstracts, Compendex, Computer & Applied Sciences, INSPEC, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.3358-3366
  • Çukurova Üniversitesi Adresli: Evet

Özet

The aim of this work is to produce alpha-alumina particles from aluminum (Al) dross via leaching-precipitation-calcination processes. In the leaching test, the effects of parameters such as the temperature, NaOH concentration, and time were investigated based on the Taguchi approach. In addition, the effect of the particle size on the Al extraction rate was determined. The Al extraction rate ranged from 78.64% to 93.11% and from 78.35% to 91.99% for ground dross and as-received dross, respectively. In the precipitation test, the pH of the leachate solution was decreased using HCl to remove Al ions as Al hydroxide precipitate. The precipitate was calcined at 1000 degrees C to 1200 degrees C for 270 min. The morphological and polymorphic properties of the products were characterized by scanning electron microscopy, atomic force microscopy, and x-ray diffraction analysis. The experimental findings indicated that the calcination temperature and stabilization time were critical for producing alpha-alumina particles rather than other polymorphs.