Çukurova Üniversitesi
Akademik Veri Yönetim Sistemi
Yayınlar & Eserler
SCI,SSCI,AHCI İNDEKSLERİNE GİREN DERGİLERDE YAYINLANAN MAKALELER
Altiner M., "Effect of alkaline types on production of calcium carbonate particles from gypsum waste for fixation of CO2 by direct mineral carbonation", INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION, vol.39, pp.113-131, 2019
Altiner M., "Recovery of Apatite From Ore Slimes Using Centrifugal Heavy Liquid Separation", JOM, vol.1, pp.1-8, 2019
Altiner M., Top S., Kaymakoğlu B., Seçkin İ.Y., Vapur H., "Production of precipitated calcium carbonate particles from gypsum waste using venturi tubes as a carbonation zone", JOURNAL OF CO2 UTILIZATION, pp.117-125, 2019
Altiner M., "Use of Taguchi approach for synthesis of calcite particles from calcium carbide slag for CO2 fixation by accelerated mineral carbonation", ARABIAN JOURNAL OF CHEMISTRY, vol.12, pp.531-540, 2019
Altiner M., "Upgrading of iron ores using microwave assisted magnetic separation followed by dephosphorization leaching ", CANADIAN METALLURGICAL QUARTERLY, vol.1, pp.1-15, 2019
Altiner M., "Influences of CO2 bubbling types on preparation of calcite nanoparticles by carbonation process", PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, vol.1, pp.1-1, 2018
Bilen M., Altiner M., Yildirim M., "Evaluation of steelmaking slag for CO2 fixation by leaching-carbonation process", PARTICULATE SCIENCE AND TECHNOLOGY, vol.36, pp.368-377, 2018
Vapur H., Top S., Altiner M., Uçkun Ş., Sarıkaya M., "Comparison of iron ores upgraded with Falcon concentrator and magnetic separators assisted by coal reduction-conversion process", PARTICULATE SCIENCE AND TECHNOLOGY, vol.1, pp.1-11, 2018
Altiner M., "Use of direct gas-solid carbonation process for fixation of CO2 as mineral carbonates in Turkish fly ashes ", INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION, vol.1, pp.1-20, 2018
Altiner M., Yildirim M., "PRODUCTION OF PRECIPITATED CALCIUM CARBONATE PARTICLES WITH DIFFERENT MORPHOLOGIES FROM DOLOMITE ORE IN THE PRESENCE OF VARIOUS HYDROXIDE ADDITIVES", PHYSİCOCHEMİCAL PROBLEMS OF MİNERAL PROCESSİNG, vol.53, pp.413-426, 2017
Altiner M., Yildirim M., "Study of using dolomite as starting material resource to produce magnesium oxychloride cement", JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, vol.1, pp.1-10, 2017
Altiner M., Kuvvetli Y., "Prediction of grinding behavior of low-grade coal based on its moisture loss by neural networks", ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, vol.1, pp.1-1, 2017
Altiner M., Yildirim M., "Production and characterization of synthetic aragonite prepared from dolomite by eco-friendly leaching?carbonation process", ADVANCED POWDER TECHNOLOGY, vol.28, pp.553-564, 2017
Altiner M., Yildirim M., "Preparation of periclase (MgO) nanoparticles from dolomite by pyrohydrolysis?calcination processes", ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, vol.1, pp.1-10, 2017
Ürünveren A., Altiner M., Ural O.B., Ural S., "The effect of major element oxide and moisture loss on grindability of Afsin-Elbistan low-grade coa", ENERGY SOURCES PART A-RECOVERY UTİLİZATİON AND ENVİRONMENTAL EFFECTS, vol.1, pp.1-1, 2017
Ürünveren A., Altiner M., Kuvvetli Y., Ural O.B., Ural S., "Prediction of Hardgrove Grindability Index of Afsin-Elbistan (Turkey) low-grade coals based on proximate analysis and ash chemical composition by neural networks", INTERNATİONAL JOURNAL OF COAL PREPARATİON AND UTİLİZATİON, vol.1, pp.1-20, 2017 (Link)
Altiner M., Yildirim M., "Influence of filler on properties of magnesium oxychloride cement prepared from dolomite", EMERGING MATERIALS RESEARCH, vol.1, pp.1-6, 2017
Altiner M., Yildirim M., Yilmaz T., "LEACHING OF MERSIN/AYDINCIK DOLOMITE ORE IN HYDROCHLORIC ACID. DISSOLUTION RATES", PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING, vol.52, pp.536-550, 2016
DİĞER DERGİLERDE YAYINLANAN MAKALELER
Altiner M., "FOSFAT CEVHERİNDEN KARBONATLI MİNERALLERİN SELEKTİF OLARAK KALSİNASYON-SAKKAROZ LİÇİ YÖNTEMİ İLE UZAKLAŞTIRILMASI", Madencilik, cilt.58, ss.87-94, 2019
Altiner M., "Study of using Calcium Carbide Slag to Prepare Calcium Oxide Briquettes by Molding and Calcination Processes through Taguchi Method", Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, cilt.33, ss.179-188, 2018
Altiner M., "Şelit Cevherinin Fiziksel ve Manyetik Alınganlık Özelliklerinden Yararlanılarak Zenginleştirilmesine Yönelik Deneysel Çalışma", Çukurova Üniversitesi Mühendislik Mimarlik Fakültesi Dergisi, cilt.32, ss.101-108, 2017 (Link)
Altiner M., Yildirim M., "AYDINCIK/İÇEL DOLOMİTLERİNDEN MAGNEZYUM KLORÜR (MgCl2) ÜRETİMİ", Çukurova Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, cilt.34, ss.106-113, 2016
Yapici N., Altiner M., "Tomarza-Şeyhbarak (Kayseri) Yöresi Manganez Rezervinin Jeolojik Ve Zenginleştirilebilirlik Araştırması", Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, cilt.28, ss.1-9, 2013
Altiner M., Yildirim M., "Afşin-Elbistan Linyitinin Kurutulmasi Ve Nem İçeriğinin Darbe Dayanimina Etkisi", Ç.Ü. Fen ve Mühendislik Bilimleri Dergisi, cilt.26, ss.19-28, 2011
HAKEMLİ KONGRE / SEMPOZYUMLARIN BİLDİRİ KİTAPLARINDA YER ALAN YAYINLAR
Altiner M., Top S., Vapur H., "A Preliminary Study on Separation of Fe and Ti From Titano-Magnetite Ore Using Coal-Based Direct Reduction Followed by Magnetic Separation", 5th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.234-234
Altiner M., "Effect of reaction conditions and reactor types on the use of industrial wastes to prepare calcium carbonates for CO2 sequestration by aqueous mineral carbonation process", 2nd International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, MACARISTAN, 7-11 Mart 2018, pp.14-14
Top S., Uçkun S., Vapur H., Altiner M., Sarıkaya M., "Magnetic separation of iron ores after hematite-magnetite conversion ", 5th International conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.266-266
Gözdamla E., Vapur H., Top S., Altiner M., "Separation of Unburned Carbon and Iron Materials in Isdemir Iron and Steel Plant Flue Dusts", 5th International conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.267-267
Altiner M., Top S., Vapur H., "Influence of NH4/Ca Molar Ratio on Polymorph Properties of Precipitated Calcium Carbonate Particles Obtained from Gypsum Waste Using a Modified Merseburg Process", 5th International conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.236-236
Top S., Altiner M., Vapur H., "Production of Fly Ash Based Geopolymer Lightweight Concrete with Different Lightweight Aggregate Additions", 5th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.102-102
Vapur H., Top S., Altiner M., "Zeolite Synthesis From Fly Ashes by Hydrothermal Alkali Pressure Leaching Process", 5th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2018), NEVŞEHİR, TÜRKIYE, 4-6 Ekim 2018, pp.54-54
Altiner M., Teymen A., "Termik Santralden Elde Edilen Artıkların CO2 Gazını Depolama Potansiyelinin Mineral Karbonatlastırma Yöntemi ile Belirlenmesi", Türkiye 21. Uluslararası Kömür Kongres, ZONGULDAK, TÜRKIYE, 11-13 Nisan 2018, pp.229-236
Altiner M., Yildirim M., "Production of Synthetic Nano Periclase (MgO) Particles from Aydincik/Mersin Dolomites", 25. Uluslararası Madencilik Kongresi ve Sergisi, ANTALYA, TÜRKIYE, 11-14 Nisan 2017, pp.813-822
Altiner M., "Preliminary studies on preparation of synthetic CaCO3 particles from calcium carbide tailings by carbonation process", 2nd International Mediterranean Science and Engineering Congress (IMSEC 2017)., ADANA, TÜRKIYE, 25-27 Ekim 2017, pp.2134-2134
Altiner M., Ürünveren A., Ural S., "Examination of Relationship between Grindability Properties and Chemical Contents of Afsin-Elbistan Lignites", 25. Uluslararası Madencilik Kongresi ve Sergisi, ANTALYA, TÜRKIYE, 11-14 Nisan 2017, pp.687-692
Altiner M., Özdemir A.C., "Production of CaO briquettes from calcium carbide slag for re-use in the process of CaC2 production", 2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), ADANA, TÜRKIYE, 25-27 Ekim 2017, pp.1-1
Ürünveren A., Altiner M., Ural S., "Afşin-Elbistan (B) Linyit Sahasındaki Örtü Tabakalarının Kazılabilirlik Özelliklerinin İncelenmesi", 1st International Mediterranean Science and Engineering Congress, ADANA, TÜRKIYE, 26-28 Ekim 2016, pp.3276-3279
Altiner M., Ürünveren A., Ural S., "Kömürlerin Petrografik Özellikleri ile Dayanımları Arasındaki İlişkinin Araştırılması", 1st International Mediterranean Science and Engineering Congress, ADANA, TÜRKIYE, 26-28 Ekim 2016, pp.3249-3254
Vapur H., Top S., Demirci S., Altiner M., "Removal Of Iron Content In Feldspar Ores By Leach Ing With Organic Acids", XVI Balkan Mineral Processing Congress, Belgrad, SIRBISTAN, 17-19 Haziran 2015, vol.2, pp.761-766
Bayat O., Altiner M., Altinçelep Z., "Upgrading Bitlis (Turkey) Kyanites Using Flotation And Multi Gravitional Methods", XVI Balkan Mineral Processing Congress, Belgrad, SIRBISTAN, 17-19 Haziran 2015, vol.1, pp.503-508
Bayat O., Kaymakoğlu B., Altinçelep Z., Altiner M., "Removal Of Zinc From Iskenderun Steelmaking Industry Blast Furnace Slag", Proceedings of the XV Balkan Mineral Processing Congress, Sozopol, BULGARISTAN, 12-16 Haziran 2013, pp.821-826
Bayat O., Top S., Altiner M., "Investigation Of The Beneficiation Of Low Grade Manganese Ores", 23rd International Mining Congress & Exhibition of Turkey, ANTALYA, TÜRKIYE, 16-19 Nisan 2013, pp.1-3
Altiner M., Yildirim M., "Determination Of Effect Of Moisture Content On Strength And Grindability Properties Of Afsin-Elbistan Lignite??", Proceedings of the 18th Coal Congress of Turkey, ZONGULDAK, TÜRKIYE, 6 Haziran 2012 - 8 Haziran 2013, ss.487-496
Bayat O., Altiner M., Altinçelep Z., Kaymakoğlu B., "Effects Of Microwave Pre-Heating On Grindability And Liberalization Degree Of Chromite Ores", Processings of the XV Balkan Mineral Processing Congress, Sozopol, BULGARISTAN, 12-16 Haziran 2013, pp.177-182
Bayat O., Altinçelep Z., Kaymakoğlu B., Altiner M., "Practice Of Statistical Control At Ready Mixed Concentre Plant In Adana", Dördüncü Maden Makineleri Sempozyumu, İZMİR, TÜRKIYE, 25-26 Mayıs 2013, ss.71-76
Bayar Kalaycı G., Altiner M., Yildirim M., "Processing Of Water Resistant Briquettes Used In Domestic Heating From Hard Coal", Proceedings of the 17th International Coal Preparation Congress, İSTANBUL, TÜRKIYE, 1-6 Ekim 2013, pp.809-814
Altiner M., Yildirim M., Vapur H., "Effects Of Microwave And Conventional Drying Methods On Grinding Characteristics Of Afsin-Elbistan Lignite??", Proceedings of the 13th. International Mineral Processing Symposium, MUĞLA, TÜRKIYE, 10-12 Ekim 2012, pp.737-745
KİTAP ve KİTAP BÖLÜMLERİ
Altiner M., Özdemir A.C., Yılmaz M. , Eds., "International Symposium on Occupational Health and Safety in Mining'2017", Önka Kağıt Matbaa, Ankara, 2017
Kiliç A.M., Kiliç Ö., Altiner M., Yılmaz M. , Ed., "Madenlerde İşçi Sağlığı ve İş Güvenliği Sempozyumu'2015", Önka Kağıt Ürünleri İmalatı Matbaa Yayıncılık, ANKARA, 2015
Akademik Veri Yönetim Sistemi | All Rights Reserved | Abis Teknoloji © 2019
Çukurova Üniversitesi BAP Koordinasyon Birimi